Electric Current Converter

Convert between units of electric current, from microamperes and milliamperes to amperes and kiloamperes. The result updates as you type.

1000

About Electric Current Converter

This Electric Current Converter is a specialized microtool for performing accurate and instantaneous conversions between the most common SI units[19] of electric current[11]: the ampere (A), the milliampere (mA), and the kiloampere (kA). As the SI base unit for electric current, the ampere[3] is a fundamental quantity in physics and electrical engineering. This tool facilitates seamless translation between the base unit, the smaller scale often encountered in electronics (milliamperes), and the large scale relevant to power distribution and heavy industry (kiloamperes), adhering strictly to the decimal metric prefixes defined by the International Bureau of Weights and Measures[18] (BIPM).

The modern definition of the ampere was established during the 2019 redefinition of SI base units[1]. It is now defined by fixing the numerical value of the elementary charge[15], *e*, to be exactly 1.602176634×10⁻¹⁹ when expressed in the unit coulomb[8] (C), which is equal to an ampere-second. Consequently, one ampere is the electric current corresponding to the flow of 1 / (1.602176634×10⁻¹⁹) elementary charges per second[22]. This definition links the ampere directly to a fundamental constant of nature, providing a more stable and universally reproducible standard than its predecessor. The full details are codified in documents like the NIST Special Publication 330[27].

Historically, the ampere's definition was based on the work of André-Marie Ampère[5] and was formalized in terms of Ampere's force law[4]. The pre-2019 definition specified the ampere as the constant current which, if maintained in two straight parallel conductors of infinite length and negligible circular cross-section placed one meter apart in a vacuum, would produce a force between these conductors equal to 2×10⁻⁷ newtons per meter of length. This mechanical definition, while foundational to the theory of electromagnetism[14], was difficult to realize with high precision in a laboratory setting, prompting the shift to a definition based on fundamental physical constants.

The prefixes kilo (k) and milli (m) represent factors of one thousand (10³) and one-thousandth (10⁻³), respectively. Kiloamperes (kA) are used to quantify extremely large currents, such as those found in lightning[20] strikes (which can exceed 100 kA), industrial arc furnaces[7], and fault currents in electrical power grids. Conversely, milliamperes (mA) are ubiquitous in electronics, describing the operating currents of integrated circuits[17], the power consumption of small devices, and the magnitude of biomedical signals measured by techniques like electrocardiography[13] (ECG).

The measurement of current is performed using an ammeter[2], an instrument that must be placed in series[23] with the circuit path, which contrasts with a voltmeter[26] measuring voltage[25] in parallel. Modern digital ammeters often use a precision shunt resistor and an analog to digital converter[6] to measure the voltage drop, calculating current via Ohm's Law[21]. For non-invasive measurements, especially at high currents, current clamps[9] utilize the Hall effect[16] or current transformers to measure the magnetic field generated by the current-carrying conductor.

How to Use

  1. Enter the numerical value of the current you wish to convert into the input field.
  2. Select the starting unit of measurement (Amperes, Milliamperes, or Kiloamperes) from the 'From' menu.
  3. Select the desired target unit of measurement from the 'To' menu.
  4. The tool automatically computes and displays the converted value in the result area.
  5. To perform a new conversion, simply modify the input value or change the unit selections.

Frequently Asked Questions

What is the fundamental definition of an ampere?

Since the 2019 redefinition of SI base units[1], the ampere[3] is defined by setting the value of the elementary charge[15] *e* to exactly 1.602176634×10⁻¹⁹ coulombs[8]. One ampere is the electric current equivalent to the flow of 1 / (1.602176634×10⁻¹⁹) elementary charges per second.

How does a kiloampere relate to an ampere?

A kiloampere (kA) is a multiple of the ampere, where the SI prefix 'kilo' denotes a factor of 10³, or one thousand. Therefore, 1 kiloampere is exactly equal to 1,000 amperes.

What is a milliampere and where is it commonly used?

A milliampere (mA) is a submultiple of the ampere, where the SI prefix 'milli' denotes a factor of 10⁻³, or one-thousandth. So, 1 milliampere equals 0.001 amperes. This unit is very common in low-power electronics, battery capacity ratings (as mAh), and biomedical sensor outputs.

Why was the definition of the ampere changed in 2019?

The previous definition was based on the idealized mechanical force between two infinitely long parallel conductors. This was a 'realization' definition that was impractical to implement with high precision. The new definition ties the ampere to a fundamental, invariant constant of nature, the elementary charge[15], enabling more accurate and consistent measurements worldwide.

What is the difference between electric current and voltage?

Electric current is the rate of flow of electric charge[10] through a conductor, measured in amperes (A). Voltage[25] (or electric potential difference) is the energy per unit charge, representing the 'pressure' that drives the current, measured in volts[24] (V). According to Ohm's Law[21], current is directly proportional to voltage and inversely proportional to resistance[12] (I = V/R).

How is electric current practically measured in a circuit?

Current is typically measured using an ammeter[2], which must be connected in series[23] with the load or component of interest. This requires breaking the circuit to insert the meter. For non-contact measurements, a current clamp[9] can be used, which measures the magnetic field surrounding the conductor.

What is the direct relationship between amperes, coulombs, and seconds?

The relationship is definitional. One ampere is defined as the flow of one coulomb[8] of charge past a point in one second[22]. The formula is A = C/s. This makes the ampere a unit of charge flow rate.

Can this tool convert other current units like microamperes (µA)?

This tool focuses on amperes, milliamperes, and kiloamperes. However, you can easily perform related conversions manually. A microampere (µA) is 10⁻⁶ amperes, or one-thousandth of a milliampere. To convert from milliamperes to microamperes, multiply by 1,000 (e.g., 0.25 mA is 250 µA).

Sources (27)
  1. Wikipedia: 2019 redefinition of the SI base units
  2. Wikipedia: Ammeter
  3. Wikipedia: Ampere
  4. Wikipedia: Ampere's force law
  5. Wikipedia: André-Marie Ampère
  6. Wikipedia: Analog-to-digital converter
  7. Wikipedia: Arc furnace
  8. Wikipedia: Coulomb
  9. Wikipedia: Current clamp
  10. Wikipedia: Electric charge
  11. Wikipedia: Electric current
  12. Wikipedia: Electrical resistance and conductance
  13. Wikipedia: Electrocardiography
  14. Wikipedia: Electromagnetism
  15. Wikipedia: Elementary charge
  16. Wikipedia: Hall effect
  17. Wikipedia: Integrated circuit
  18. Wikipedia: International Bureau of Weights and Measures (BIPM)
  19. Wikipedia: International System of Units (SI)
  20. Wikipedia: Lightning
  21. Wikipedia: Ohm's law
  22. Wikipedia: Second
  23. Wikipedia: Series and parallel circuits
  24. Wikipedia: Volt
  25. Wikipedia: Voltage
  26. Wikipedia: Voltmeter
  27. NIST Special Publication 330: The International System of Units (SI)

About Matt George

I'm Matt George, a software engineer in the startup space. I run my own shop building software for early-stage founders, and I love making free tools and experiences that people actually use. Enjoy using Electric Current Converter!

More Free Tools